3-compartment locker
419,40 €
plus. Versandkosten
1920x1200x500 mm (HxWxD), 3-seater locker with reinforced burglary protection, torsion-resistant, double-walled doors, door opening limiter, hat shelf, clothes rail with 3 hooks, base 160 mm, colour: body light grey RAL7035, powder-coated
Lieferzeit: ca. 5-7 Wochen
A 3-seater locker for changing purposes must fulfil all requirements in order to be used without restriction in individual areas of application. Perfect workmanship and practical features as well as an appealing design combined with an excellent price-performance ratio are the basic quality requirements at DIVIKOM. All variants of the lockers.
The body and door leaves are made of high-quality sheet steel. A hard powder coating serves three purposes at once: it is scratch and abrasion resistant, has a positive influence on the design and offers durable corrosion protection.
The quality features of our well-known top products also include innovative solutions with a high level of functionality, such as
- Improved protection against break-in attempts
- Double-walled doors to prevent twisting
- Ventilation system according to the natural laws of gravity
- Four feet are possible instead of a plinth
- Substructure bench seat as an alternative
- State-of-the-art mechanical and electronic locking systems
Torsion-resistant, double-walled doors
Robust door opening limiter
Sheet steel doubled in the lock area
Effective and natural ventilation system with chimney effect
Features - 3-seater locker
exterior dimensions:
1920x1200x500 mm (HxWxD)
internal dimensions with section width 400 mm
Clear opening width with door open approx. 320 mm
Usable width inside approx. 398 mm
Usable depth inside approx. 480 mm
TOP SAFETY:
- Double-walled doors with high resistance to torsion and bending loads, door hinges on both sides
- Reinforcement in the lock area, steel plate doubled - effective protection against bending and twisting of the bolt
- Lock bolt with hook - effective protection against door break-out
- Door opening limiter - effective protection against damage caused by overstretching the limit position
- Security twist lock, when padlock is inserted, remains freely rotating and the bolt is mechanically locked, effective protection against forced operation
HOUSING:
- Spot-welded construction made from high-quality sheet steel
- Without sharp edges
- Clean machining
- Burglar-resistant door hinges on the right and left
- Plinth closed on all sides
- Plastic glides
DOORS:
- Torsion-resistant, double-walled doors approx. 20 mm thick
- Internal pivot bolts
- Door opening limiter with opening angle of approx. 100 degrees
- Bumpers for noise insulation
- Plastic sign holder, transparent, dimensions 15×60 mm
- Door with reinforcement of the lock assembly opening
- Plastic hooks on the inside of the door
INTERIOR FITTINGS:
- Hat base, firmly welded in
- Clothes rail with 3 sliding plastic hooks
- Preparation for subsequent assembly of the shoe shelf in the lower section of the cabinet
LOCKING SYSTEM:
- Cylinder lock with 2 keys (4000 combinations, with master key system) or
- Security twist lock for padlock (suitable for shackle diameter 5-8 mm)
- Bolt with safety hook used, which increases resistance to the door being forced open
COLOUR:
- High-quality powder coating
- Cigarette burn-resistant and easy-care surface
- Standard colours: Housing light grey RAL7035 / doors light blue RAL5012, light grey RAL7035 without surcharge,
- with surcharge: doors gentian blue RAL5010, yellow RAL1023, red RAL3000, green RAL6024, orange RAL2004, anthracite RAL7016
- Powder coating with fine structure, matt for better abrasion resistance and appearance
VENTILATION:
- Natural and effective ventilation system: the air goes up and down in the locker (cold and warm air). Hat shelf, bottom, back and upper front part of the cabinet are perforated
You can add the following accessories to your cabinets
Application - Locker 3er
3-seater locker is characterised by maximum quality and convenience. There are two options for achieving secure stability: a closed plinth frame or alternatively four feet. For better differentiation, the doors can vary in RAL colours from locker to locker, while the body is kept in light grey.
The cabinet body made of sturdy sheet steel ensures a long service life. The tried-and-tested powder coating process ensures corrosion protection and an elegant appearance. The coloured powder melts at approx. 180 degrees and then forms an inseparable bond with the metal surface. The powder coating is also scratch-resistant and resistant to cigarette burns.
Natural ventilation is one of the most important cabinet functions. The perforations for this are incorporated at the bottom of the back and at the top of the front. Locker 3 is with self-ventilation effect.
Internal pivot pins make a significant contribution to increased security and convenience. The doors can still be opened up to 100 degrees. The risk of over-rotation is minimised by a sturdy door opening limiter. Soft rubber buffers in the door frame provide noise protection when closing the door.
The interior fittings include a hat shelf and a clothes rail with three sliding coat hooks. The double-walled security doors can be fitted with various locking devices. These range from traditional rotary bolt locks to modern locking systems with cylinder locks. Even operation using smartphone technology is one of the most frequently used alternatives today.
Our customer base includes countless organisations such as companies, public institutions, sports clubs, fitness studios etc. throughout Europe.
| Door/front colour | RAL5012 light blue, RAL7035 light grey, RAL1023 yellow, RAL2004 orange, RAL3000 red, RAL5009 azure blue, RAL5010 gentian blue, RAL6024 traffic green, RAL7016 anthracite |
|---|---|
| Locking | Cylinder lock with 2 keys, safety twist lock for padlock |
| Compartment width (mm) | 400 |
| Number of compartments | 3 |
| Width (mm) | 1200 |
| Compartments per compartment | 1 |
| Height (mm) | 1920 |
| Type of delivery | Standard delivery programme |
| Brand | Divikom steel furniture |
| Depth (mm) | 500 |
Be the first to review “3er Spind”
Related products
Lieferzeit: ca. 5-7 Wochen
Lieferzeit: 5-7 Wochen
Lieferzeit: ca. 5-7 Wochen
Lieferzeit: ca. 5-7 Wochen
Deutsch (Sie) 
English (UK) 
Dansk 
Reviews
There are no reviews yet.