Locker Locker

 

exterior dimensions:

1800x1200x500 mm (HxWxD)

internal dimensions with section width 400 mm

Clear opening width with door open approx. 320 mm

Usable width inside approx. 398 mm

Usable depth inside approx. 480 mm

 

 

- Double-walled doors highly resistant to torsion and bending loads, door hinges on both sides

- Reinforcement of the door construction in the lock area - protection against the bolt twisting and bending

- Lock bolt with hook - effective protection against door break-out

- Door opening limiter serves as effective protection against damage caused by exceeding the limit position

- Safety twist lock with freewheel function provides a high level of security against forced operation

 

CORPUS:

- Sturdy, spot-welded construction made of high-quality sheet steel

- Without sharp edges

- Clean machine processing

- Right and left door hinges on both sides

- Closed plinth, all sides

- Plastic glides

 

DOORS:

- Double-walled doors approx. 20 mm thick, torsion-resistant design

- Internal pivot bolts

- Door opening limiter with opening angle of approx. 100 degrees

- Bumpers for noise insulation

- Plastic name tag, transparent, size 15×60 mm

- Door with reinforcement of the lock assembly opening

- Plastic hooks on the inside of the door

 

INTERIOR FITTINGS:

- Shelf, permanently shrink-wrapped

- Clothes rail with 3 plastic hooks

- Preparation for subsequent assembly of the shoe shelf in the lower section of the cabinet

 

LOCKING SYSTEM:

- Cylinder lock with 2 keys (2000 combinations, with master key system) or

- Security twist lock for padlock (suitable for shackle diameter 5-8 mm)

- Bolt with safety hook that improves resistance to door break-out

 

COLOUR:

- High-quality powder coating

- Cigarette burn-resistant and easy-care surface

- Standard colours: Body light grey RAL7035 / doors light grey RAL7035, light blue RAL5012 without surcharge,

- with surcharge: doors yellow RAL1023, orange RAL2004, red RAL3000, gentian blue RAL5010, green RAL6024, anthracite RAL7016

- Matt powder colour for a better appearance and abrasion resistance

 

VENTILATION:

- Natural and effective ventilation system: the air goes up and down in the locker (cold and warm air). Hat shelf, bottom, back and upper front part of the cabinet are perforated

 

INJURY SAFETY:

- All points are designed with triple edging, folds are injury-proof

 

COMFORT:

- Mounting holes in sides for mutual connection in rows

- Holes in the back for mutual mounting of back panel + back panel

- Ready for retrofitting the plinth or feet

- Additional accessories (hook, box, mirror, shoe tray)

- Mounting holes on the inside of the door for hooks and accessories

- Height adjustment for levelling (optional)

 

DAMP-PROOF DESIGN AS AN OPTION

Moisture-proof design for locker wardrobe is possible according to customer requirements.

- Completely electrolytically galvanised and powder-coated

- for changing rooms in the vicinity of wet rooms

- For rooms with high humidity

- For the covered outdoor area

Use of the wardrobe locker locker

Wardrobe locker is characterised by maximum quality and convenience. There are two options for achieving secure stability: a closed plinth frame or alternatively four feet. For better differentiation, the doors can differ in RAL colours from locker to locker, while the body is in light grey.

The cabinet body made of sturdy sheet steel ensures a long service life. The tried-and-tested powder coating process ensures corrosion protection and an elegant appearance. The coloured powder melts at approx. 180 degrees and then forms an inseparable bond with the metal surface. The powder coating is also scratch-resistant and resistant to cigarette burns.

Natural ventilation is one of the most important cabinet functions. The perforations for this are incorporated at the bottom of the back and at the top of the front. Locker 3 is with self-ventilation effect.

Internal pivot pins make a significant contribution to increased security and convenience. The doors can still be opened up to 100 degrees. The risk of over-rotation is minimised by a sturdy door opening limiter. Soft rubber buffers in the door frame provide noise protection when closing the door.

The interior fittings include a hat shelf and a clothes rail with three sliding coat hooks. The double-walled security doors can be fitted with various locking devices. These range from traditional rotary bolt locks to modern locking systems with cylinder locks. Even operation using smartphone technology is one of the most frequently used alternatives today.

Countless organisations, such as companies, public institutions, sports clubs, fitness studios, etc., belong to our customer base throughout Europe.